فایل پی دی اف کامل SHELL Company STD Drawings for Storage Tanks PDF

توجه : این پروژه فقط به صورت فایل (با پسوند) pdf , dwg ارائه میگردد
تعداد صفحات فایل : ۳۰۰

SHELL Company STD Drawings for Storage Tanks

This package included DWG drawings of Storage tanks

List of drawings:

1. Snamprogetti Co. STD Drawings for Storage Tanks
2. wind girders for open top tanks
3. welding details
4. welding sequences
5. typical welding sequences for shell plates
6. typical welding sequences for cone roof plates
7. concrete foundation ring for tanks
8. holding-down bolts for tanks with concrete foundation ring
9. typical welding sequences for dome roof plates
10. handrails for cone roof tanks
11. handrails for dome roof tanks
12. product drain and water draw-off
13. roof nozzles
14. earthing and bonding details for fixed roof tanks with floating screen
15. dip plate
16. expansion hatch for asphalt tank
17. spiral type staircase provided with stairtreads of galvanised grating
18. typical side drain with sump
19. single manhole
20. earthing and bonding details for floating roof tank
21. RIM vent for SIPM seal construction
22. deck manholes with and without valve
23. ۸ inch slotted guide pole/sampling pole for floating roof tanks
24. level gauge pole for fixed roof tanks (execution for custody transfer)
25. combined guide pole/level gauge pole for floating roof tanks (for custody transfer)
26. typical bracing for rolling ladders on large diameter tanks
27. roof manhole 20 inch or 24 inch diameter
28. open vent
29. vertical ladder
30. walkway between tanks
31. typical extension pipe on inlet and outlet nozzles for floating roof tank
32. level gauge pole for fixed roof tanks (non custody transfer)
33. nameplate with bracket for tanks
34. elevated walkway (galvanized) to center of a fixed roof tank – cone roof
35. elevated walkway (galvanized) to center of a fixed roof tank – dome roof
36. typical cone roof with external rafters
37. fixed dome roof with external trusses
38. pressure vacuum valve for storage of product with high true vapour pressure in a floating roof on a manhole or bleeder vent
39. walkway and windgirders – slope and welding sequence
40. tank shell nozzles – flanged class 150
41. shell manhole for tanks up to a height of 25 m
42. reference-points for survey of vertical steel storage tanks (general layout)
43. reference-points for survey of vertical steel storage tanks (tank roofs)
44. reference-points for survey of vertical steel storage tanks (tank bottom)