پاورپوینت کامل technical language انتقال و توزیع برق به صورت انگلیسی ۱۵ اسلاید در PowerPoint

توجه : این فایل به صورت فایل power point (پاور پوینت) ارائه میگردد

 پاورپوینت کامل technical language انتقال و توزیع برق به صورت انگلیسی ۱۵ اسلاید در PowerPoint دارای ۱۵ اسلاید می باشد و دارای تنظیمات کامل در PowerPoint می باشد و آماده ارائه یا چاپ است

شما با استفاده ازاین پاورپوینت میتوانید یک ارائه بسیارعالی و با شکوهی داشته باشید و همه حاضرین با اشتیاق به مطالب شما گوش خواهند داد.

لطفا نگران مطالب داخل پاورپوینت نباشید، مطالب داخل اسلاید ها بسیار ساده و قابل درک برای شما می باشد، ما عالی بودن این فایل رو تضمین می کنیم.

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل می باشد و در فایل اصلی پاورپوینت کامل technical language انتقال و توزیع برق به صورت انگلیسی ۱۵ اسلاید در PowerPoint،به هیچ وجه بهم ریختگی وجود ندارد

بخشی از مطالب داخلی اسلاید ها

پاورپوینت کامل technical language انتقال و توزیع برق به صورت انگلیسی ۱۵ اسلاید در PowerPoint

اسلاید ۳: Introduction:The purpose of the electric transmission system is the interconnection of the electric-energy-producing power plants or generating stations with the loads. A three-phase AC system is used for most transmission lines. The operating frequency is 60 Hz in the United States and 50 Hz in Europe, Australia, and part of Asia3

اسلاید ۴: GenerationStations: The generating station converts the stored energy of gas, oil, coal, nuclear fuel, or water position to electric energy. The most frequently used power plants are as follows: Thermal power plant. The fuel is pulverized coal or natural gas. Older plants may use oil. The fuel is mixed with air and burned in a boiler that generates steam. The high-pressure and hightemprature steam drives the turbine, which turns the generator that converts the mechanical energy to electric energy. Nuclear power plant. Enriched uranium produces atomic fission that heats water and produces steam. The steam drives the turbine and generator. Hydro power plants. A dam increases the water level on a river, which produces fast water flow to drive a hydro-turbine. The hydro-turbine drives a generator that produces electric energy. Gas turbine. Natural gas is mixed with air and burned. This generates a high-speed gas flow that drives the turbine, which turns the generator.4

اسلاید ۵: concept of energy: The electric power transfer process is called electric power transfer. This process usually involves the transfer of electrical energy from the producer or producer to distribution posts near the cities or the assembly centers of the industry, and hence the delivery of electrical energy to consumers within the range of electrical energy distribution. Electric power transmission allows us to use electrical energy simply and without accepting the cost of carrying fuel as well as the pollution produced by burning fuel at the plant. 5

اسلاید ۶: ۶

اسلاید ۷: In power plants, power is produced at relatively small voltages (eventually 30 kV), and then by power post transformers, according to the length of the pipeline and other network considerations, to a voltage between 115 and 765 kV (in Iran, this voltage is usually 400 kV) Increases so that it can be transmitted over long paths.Transmission network outputAs the transmission lines reach cities and population centers for safety, the voltage decreases in several steps. The stages of voltage drop in standard Iranian networks are from kV230 / 400, kV132 / 230, kV63 / 132 and kV20 / 63, respectively. In the final stage or distribution stage, voltage transformers are reduced from kV to 204 kV, or 231/400 volts. In other countries, the consumer voltage is between 100 and 600 volts.7

اسلاید ۸: ۸